⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Crook County

Crook County, Oregon: well depth, water level & drilling cost

✓ 7,059 OWRD records · verified 2026-06-30

280 ftmedian well depth
86 ft–455 fttypical depth range
80 ftmedian static water level
20 gpmmedian yield (6,139 tests)

How deep are wells in Crook County, Oregon?

The median drilled well depth in Crook County is 280 ft, based on 6,466 wells with recorded depths in the state OWRD database. Half of all wells fall between 86 ft and 455 ft; 90% are shallower than 650 ft. Wells drilled since 2016 have a median depth of 414 ft.

How much does it cost to drill a well in Crook County?

Applying published per-foot rates to the local median depth of 414 ft: drilling and casing alone typically runs $10,350–$26,910; a complete system including pump, pressure tank, and hookup typically runs $24,840–$41,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Crook County?

The median static water level is 80 ft below ground surface (middle half of wells: 20 ft–280 ft), from 6,436 measurements.

How much water do wells in Crook County produce?

The median tested yield is 20 gpm (middle half: 10 gpm–30 gpm), from 6,139 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Crook County address — $19

Drilled depth distribution

0–50 ft 779 50–100 ft 963 100–150 ft 390 150–200 ft 369 200–300 ft 862 300–400 ft 949 400–600 ft 1,243 600+ ft 911

Who drills wells in Crook County?

Companies by number of wells completed in this county since 2016, per filed well logs (Oregon Water Resources Department).

DrillerWells since 2016
AIKEN WELL DRILLING INC.392
ABBAS WELL DRILLING CO358
D & D WELL DRILLING LLC96
MAPHET WELL DRILLING & PUMP58
WESTERN WATER DEVELOPMENT53
AIKEN WELL DRILLING52
EDGE WELL DRILLING LLC47
GLACIER DRILLING & DEWATERING44

Get quotes from local drillers

Looking at a specific property in Crook County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.