Oregon Well Data field records · 2026 survey

Oregon Well Data › Morrow County

Morrow County, Oregon: well depth, water level & drilling cost

✓ 2,452 OWRD records · verified 2026-06-30

161 ftmedian well depth
95 ft–325 fttypical depth range
39 ftmedian static water level
60 gpmmedian yield (1,992 tests)

How deep are wells in Morrow County, Oregon?

The median drilled well depth in Morrow County is 161 ft, based on 2,261 wells with recorded depths in the state OWRD database. Half of all wells fall between 95 ft and 325 ft; 90% are shallower than 600 ft. Wells drilled since 2016 have a median depth of 162 ft.

How much does it cost to drill a well in Morrow County?

Applying published per-foot rates to the local median depth of 162 ft: drilling and casing alone typically runs $4,050–$10,530; a complete system including pump, pressure tank, and hookup typically runs $9,720–$16,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Morrow County?

The median static water level is 39 ft below ground surface (middle half of wells: 20 ft–86 ft), from 2,243 measurements.

How much water do wells in Morrow County produce?

The median tested yield is 60 gpm (middle half: 35 gpm–150 gpm), from 1,992 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Morrow County address — $19

Drilled depth distribution

0–50 ft 142 50–100 ft 453 100–150 ft 451 150–200 ft 210 200–300 ft 330 300–400 ft 233 400–600 ft 215 600+ ft 227

Who drills wells in Morrow County?

Companies by number of wells completed in this county since 2016, per filed well logs (Oregon Water Resources Department).

DrillerWells since 2016
ZOLLMAN'S LARRY BURD WELL DRILLING LLC117
GLACIER DRILLING & DEWATERING116
WATER WELL DEVELOPING & SURVEYS85
COURTNEY WELL DRILLING, LLC30
HOLT SERVICES INC5
COURTNEY WELL DRILLING LLC4
SCHNEIDER WATER SERVICES3
STILLWATER LLC2

Get quotes from local drillers

Looking at a specific property in Morrow County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.