⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Wasco County › Antelope (97001)

Antelope, OR (97001): well depth, water level & drilling cost

✓ 129 OWRD records · Wasco County

327 ftmedian well depth
218 ft–496 fttypical depth range
35 ftmedian static water level
30 gpmmedian yield (52 tests)

Pull every recorded well near a Antelope (97001) address — $49

How deep are wells in and around Antelope (97001), Oregon?

The median drilled well depth in and around Antelope (97001) is 327 ft, based on 121 wells with recorded depths in the state OWRD database. Half fall between 218 ft and 496 ft; 90% are shallower than 574 ft.

How much does it cost to drill a well in and around Antelope (97001)?

Applying published per-foot rates to the local median depth of 327 ft: drilling and casing alone typically runs $8,175–$21,255; a complete system including pump, pressure tank, and hookup typically runs $19,620–$32,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Antelope (97001)?

The median static water level is 35 ft below ground surface (middle half of wells: 12 ft–108 ft), from 122 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 4 100–150 ft 9 150–200 ft 7 200–300 ft 30 300–400 ft 28 400–600 ft 30 600+ ft 10
Looking at a specific property in Antelope (97001)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Antelope (97001)

Free. Goes to licensed drillers working Wasco County.

Part of Wasco County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.