⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Clackamas County › Mulino (97042)

Mulino, OR (97042): well depth, water level & drilling cost

✓ 1,630 OWRD records · Clackamas County

150 ftmedian well depth
92 ft–250 fttypical depth range
41 ftmedian static water level
20 gpmmedian yield (1,473 tests)

Pull every recorded well near a Mulino (97042) address — $49

How deep are wells in and around Mulino (97042), Oregon?

The median drilled well depth in and around Mulino (97042) is 150 ft, based on 1,513 wells with recorded depths in the state OWRD database. Half fall between 92 ft and 250 ft; 90% are shallower than 380 ft.

How much does it cost to drill a well in and around Mulino (97042)?

Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mulino (97042)?

The median static water level is 41 ft below ground surface (middle half of wells: 19 ft–139 ft), from 1,495 measurements.

Drilled depth distribution

0–50 ft 53 50–100 ft 370 100–150 ft 331 150–200 ft 233 200–300 ft 252 300–400 ft 138 400–600 ft 128 600+ ft 8
Looking at a specific property in Mulino (97042)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mulino (97042)

Free. Goes to licensed drillers working Clackamas County.

Part of Clackamas County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.