⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Clackamas County › Sandy (97055)

Sandy, OR (97055): well depth, water level & drilling cost

✓ 2,200 OWRD records · Clackamas County

174 ftmedian well depth
100 ft–265 fttypical depth range
76 ftmedian static water level
16 gpmmedian yield (2,028 tests)

Pull every recorded well near a Sandy (97055) address — $49

How deep are wells in and around Sandy (97055), Oregon?

The median drilled well depth in and around Sandy (97055) is 174 ft, based on 2,096 wells with recorded depths in the state OWRD database. Half fall between 100 ft and 265 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Sandy (97055)?

Applying published per-foot rates to the local median depth of 174 ft: drilling and casing alone typically runs $4,350–$11,310; a complete system including pump, pressure tank, and hookup typically runs $10,440–$17,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sandy (97055)?

The median static water level is 76 ft below ground surface (middle half of wells: 35 ft–157 ft), from 2,075 measurements.

Drilled depth distribution

0–50 ft 40 50–100 ft 463 100–150 ft 407 150–200 ft 272 200–300 ft 496 300–400 ft 204 400–600 ft 156 600+ ft 58
Looking at a specific property in Sandy (97055)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sandy (97055)

Free. Goes to licensed drillers working Clackamas County.

Part of Clackamas County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.