⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Washington County › Hillsboro (97124)

Hillsboro, OR (97124): well depth, water level & drilling cost

✓ 1,856 OWRD records · Washington County

80 ftmedian well depth
53 ft–200 fttypical depth range
17 ftmedian static water level
11 gpmmedian yield (985 tests)

Pull every recorded well near a Hillsboro (97124) address — $49

How deep are wells in and around Hillsboro (97124), Oregon?

The median drilled well depth in and around Hillsboro (97124) is 80 ft, based on 1,290 wells with recorded depths in the state OWRD database. Half fall between 53 ft and 200 ft; 90% are shallower than 403 ft.

How much does it cost to drill a well in and around Hillsboro (97124)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hillsboro (97124)?

The median static water level is 17 ft below ground surface (middle half of wells: 10 ft–32 ft), from 1,351 measurements.

Drilled depth distribution

0–50 ft 285 50–100 ft 410 100–150 ft 160 150–200 ft 107 200–300 ft 106 300–400 ft 89 400–600 ft 77 600+ ft 56
Looking at a specific property in Hillsboro (97124)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hillsboro (97124)

Free. Goes to licensed drillers working Washington County.

Part of Washington County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.