⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Lane County › Elmira (97437)

Elmira, OR (97437): well depth, water level & drilling cost

✓ 1,449 OWRD records · Lane County

105 ftmedian well depth
67 ft–205 fttypical depth range
23 ftmedian static water level
17 gpmmedian yield (1,316 tests)

Pull every recorded well near a Elmira (97437) address — $49

How deep are wells in and around Elmira (97437), Oregon?

The median drilled well depth in and around Elmira (97437) is 105 ft, based on 1,358 wells with recorded depths in the state OWRD database. Half fall between 67 ft and 205 ft; 90% are shallower than 350 ft.

How much does it cost to drill a well in and around Elmira (97437)?

Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elmira (97437)?

The median static water level is 23 ft below ground surface (middle half of wells: 14 ft–40 ft), from 1,339 measurements.

Drilled depth distribution

0–50 ft 89 50–100 ft 521 100–150 ft 241 150–200 ft 131 200–300 ft 160 300–400 ft 115 400–600 ft 86 600+ ft 15
Looking at a specific property in Elmira (97437)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elmira (97437)

Free. Goes to licensed drillers working Lane County.

Part of Lane County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.