⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Lane County › Lowell (97452)

Lowell, OR (97452): well depth, water level & drilling cost

✓ 511 OWRD records · Lane County

150 ftmedian well depth
103 ft–250 fttypical depth range
29 ftmedian static water level
15 gpmmedian yield (485 tests)

Pull every recorded well near a Lowell (97452) address — $49

How deep are wells in and around Lowell (97452), Oregon?

The median drilled well depth in and around Lowell (97452) is 150 ft, based on 493 wells with recorded depths in the state OWRD database. Half fall between 103 ft and 250 ft; 90% are shallower than 349 ft.

How much does it cost to drill a well in and around Lowell (97452)?

Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lowell (97452)?

The median static water level is 29 ft below ground surface (middle half of wells: 15 ft–60 ft), from 494 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 95 100–150 ft 137 150–200 ft 61 200–300 ft 105 300–400 ft 46 400–600 ft 33 600+ ft 5
Looking at a specific property in Lowell (97452)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lowell (97452)

Free. Goes to licensed drillers working Lane County.

Part of Lane County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.