⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Jackson County › Butte Falls (97522)

Butte Falls, OR (97522): well depth, water level & drilling cost

✓ 490 OWRD records · Jackson County

185 ftmedian well depth
120 ft–286 fttypical depth range
38 ftmedian static water level
10 gpmmedian yield (383 tests)

Pull every recorded well near a Butte Falls (97522) address — $49

How deep are wells in and around Butte Falls (97522), Oregon?

The median drilled well depth in and around Butte Falls (97522) is 185 ft, based on 453 wells with recorded depths in the state OWRD database. Half fall between 120 ft and 286 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Butte Falls (97522)?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Butte Falls (97522)?

The median static water level is 38 ft below ground surface (middle half of wells: 19 ft–69 ft), from 454 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 65 100–150 ft 95 150–200 ft 57 200–300 ft 113 300–400 ft 58 400–600 ft 40 600+ ft 11
Looking at a specific property in Butte Falls (97522)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Butte Falls (97522)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.