⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Jackson County › Jacksonville (97530)

Jacksonville, OR (97530): well depth, water level & drilling cost

✓ 1,612 OWRD records · Jackson County

200 ftmedian well depth
126 ft–305 fttypical depth range
30 ftmedian static water level
8 gpmmedian yield (1,471 tests)

Pull every recorded well near a Jacksonville (97530) address — $49

How deep are wells in and around Jacksonville (97530), Oregon?

The median drilled well depth in and around Jacksonville (97530) is 200 ft, based on 1,553 wells with recorded depths in the state OWRD database. Half fall between 126 ft and 305 ft; 90% are shallower than 440 ft.

How much does it cost to drill a well in and around Jacksonville (97530)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Jacksonville (97530)?

The median static water level is 30 ft below ground surface (middle half of wells: 19 ft–52 ft), from 1,531 measurements.

Drilled depth distribution

0–50 ft 49 50–100 ft 130 100–150 ft 321 150–200 ft 195 200–300 ft 391 300–400 ft 229 400–600 ft 184 600+ ft 54
Looking at a specific property in Jacksonville (97530)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jacksonville (97530)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.