⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Jackson County › Phoenix (97535)

Phoenix, OR (97535): well depth, water level & drilling cost

✓ 1,225 OWRD records · Jackson County

240 ftmedian well depth
140 ft–370 fttypical depth range
28 ftmedian static water level
9 gpmmedian yield (1,037 tests)

Pull every recorded well near a Phoenix (97535) address — $49

How deep are wells in and around Phoenix (97535), Oregon?

The median drilled well depth in and around Phoenix (97535) is 240 ft, based on 1,119 wells with recorded depths in the state OWRD database. Half fall between 140 ft and 370 ft; 90% are shallower than 510 ft.

How much does it cost to drill a well in and around Phoenix (97535)?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Phoenix (97535)?

The median static water level is 28 ft below ground surface (middle half of wells: 14 ft–57 ft), from 1,116 measurements.

Drilled depth distribution

0–50 ft 35 50–100 ft 94 100–150 ft 178 150–200 ft 129 200–300 ft 239 300–400 ft 181 400–600 ft 180 600+ ft 83
Looking at a specific property in Phoenix (97535)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Phoenix (97535)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.