Oregon Well Data › Klamath County › Klamath Falls (97603)
Klamath Falls, OR (97603): well depth, water level & drilling cost
✓ 1,427 OWRD records · Klamath County
Pull every recorded well near a Klamath Falls (97603) address — $49
How deep are wells in and around Klamath Falls (97603), Oregon?
The median drilled well depth in and around Klamath Falls (97603) is 281 ft, based on 1,321 wells with recorded depths in the state OWRD database. Half fall between 130 ft and 508 ft; 90% are shallower than 916 ft.
How much does it cost to drill a well in and around Klamath Falls (97603)?
Applying published per-foot rates to the local median depth of 281 ft: drilling and casing alone typically runs $7,025–$18,265; a complete system including pump, pressure tank, and hookup typically runs $16,860–$28,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Klamath Falls (97603)?
The median static water level is 30 ft below ground surface (middle half of wells: 11 ft–100 ft), from 1,290 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Klamath County.
Part of Klamath County well records.
Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.