⟁ Oregon Well Data field records · 2026 survey

Oregon Well Data › Wheeler County › Mitchell (97750)

Mitchell, OR (97750): well depth, water level & drilling cost

✓ 193 OWRD records · Wheeler County

208 ftmedian well depth
79 ft–389 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (162 tests)

Pull every recorded well near a Mitchell (97750) address — $49

How deep are wells in and around Mitchell (97750), Oregon?

The median drilled well depth in and around Mitchell (97750) is 208 ft, based on 182 wells with recorded depths in the state OWRD database. Half fall between 79 ft and 389 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Mitchell (97750)?

Applying published per-foot rates to the local median depth of 208 ft: drilling and casing alone typically runs $5,200–$13,520; a complete system including pump, pressure tank, and hookup typically runs $12,480–$20,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mitchell (97750)?

The median static water level is 40 ft below ground surface (middle half of wells: 19 ft–103 ft), from 171 measurements.

Drilled depth distribution

0–50 ft 19 50–100 ft 39 100–150 ft 18 150–200 ft 9 200–300 ft 28 300–400 ft 25 400–600 ft 31 600+ ft 13
Looking at a specific property in Mitchell (97750)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mitchell (97750)

Free. Goes to licensed drillers working Wheeler County.

Part of Wheeler County well records.

Method: medians computed from OWRD records (water wells only (log type 'Water Well' — monitoring wells and geotechnical holes excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.